Casa Lambretta 225 SS kit

006_Casa225_90206

The ‘Lydden Hill Replica’ kit from Casa Lambretta Performance has a Nikasil-lined aluminium barrel, anodised head with centre squish, and forged piston using two thin rings. It has been designed to work with a 58mm crank and retails at £585 plus p&p.
The inlet uses a six-petal Boysen reed block with a choice of manifolds to suit Dellorto 30mm, 34mm or Mikuni TMX 35 carbs and the exhaust seals with an O-ring over the bridged port.
Contact JB Tuning (Casa Performance UK distributor) on 01702 545952 or visit www.jbtuning.co.uk

Subscribe to Scootering Magazine

Enjoy more Scootering reading in the monthly magazine. Click here to subscribe.

Article continues below...
Advert

Enjoy more Scootering reading in the monthly magazine.
Click here to subscribe & save.

Scooter Trader